The fastest method of coating a vehicle with a ceramic scratch resistance compound is only possible with Nasiol MetalCoat F2 spray-on application.

Nasiol MetalCoat F2 can safely treat the surfaces of automobiles, bicycles, motorcycles, and trucks with its unique nano-coating formula by forming a single layer scratch resistance level.


  • Spray it and buff it! A simple worry-free application and cleaning.
  • Instant gloss with an exceptional degree of water repellency.
  • Perfect for detailing enthusiasts.
  • Safe for exterior plastic trims.
  • High scale resistance against destructive chemicals.
  • Surface protection between 6 to 12 months.


Nasiol MetalCoat F2 is applicable to car body, engine plastic and metal parts, headlights, taillights, and rims. Do not apply to unlacquered plastic parts, fresh paint jobs (up to 3 months), low-quality paint jobs, glass, textile, and tires.


  • Ensure that temperature and relative humidity (RH) values (+5 ̊C ~ + 30 ̊C / 41 ̊F ~ 86 ̊F / 50% RH) of application space are as close as possible to suggested conditions to obtain maximum product performance. Avoid direct sunlight during the application and only work on cool surfaces. Wash your vehicle thoroughly. If required, apply clay bar.
  • After decontamination, apply polishing / compounding via using appropriate tools and silicone free / wax-free cutting compounds with respect to the physical condition of your vehicle’s surface.
  • When polishing is complete, wash the car and ensure that all the application areas are totally dry before using the product.
  • Prepare the surface by using Nasiol Clean to remove any residual contamination and dry with a lint-free microfiber cloth prior to the use of the product.
  • Before using the product, wear the protective nitrile gloves included in the box.
  • Consumption is 5-8mL/m² (5-8mL /10ft²). Spray on one square meter around 20-30 times with a standard MetalCoat F2 bottle and buff immediately with Nasiol Microfiber Cloth.
  • Do not work on areas larger than 1m²/10ft² at once. Keep the coated surface away from direct sunlight, dust, water and contamination during 24 hours curing period.


  • Nasiol MetalCoat F2
  • Microfiber Cloth
  • Mini Trigger
  • Nitrile Gloves
  • Nasiol Sticker

Nasiol MetalCoat F2 Specifications

Volume 50mL
Application Surfaces Car body, engine plastic and metal parts, headlights, taillights, and rims
Durability Up to 1 year
Chemical Resistance 12>pH>1
Scratch Resistance
Water Repellency
Oil Repellency
Coating Thickness 200-300nm
Consumption per Unit Area 5-8mL/m2
Consumption Small Vehicles (A-B Class) : 30-35mL
Medium Vehicles (C-D Class) : 35-40mL
Large Vehicles (E Class & SUV) : 40-50mL
Temperature Durability 275°C
Application Temperature 5°C-30°C
Curing Period 4 hours to touch,
24 hours for water contact
Storage Conditions -3 ̊C to +30 ̊C
Shelf Life 1 year without opening the bottle,
1 week after opening the bottle
Quantity/Parcel 12 pieces
chemical resistance

Chemical Resistance

stain free

Stain Free

easy clean

Easy Clean


High Hydrophobic


What is Nasiol MetalCoat F2? What are its benefits?

Nasiol MetalCoat F2 is a paint protection product applied to the car body. It offers ease of application thanks to its spray form. It provides the treated surface with water and oil repellency and allows for the easy cleaning of difficult stains such as bird droppings. It protects the color of the car paint by providing UV protection. It has 7H scratch resistance. Its durability is up to 1 year.

What surfaces can it be applied to? Can it be applied over PPF (Paint Protection Film), foil, etc.?

Nasiol MetalCoat F2 cannot be applied over films and coatings such as PPF. The product can be applied to the surfaces listed below:

  • Car rims and headlights
  • Plastic cockpit parts
  • Under-hood metal parts
  • All other shiny metal and plastic surfaces

What surfaces should it not be applied to?

  • Plasti-Dips
  • Freshly painted components (Up to 3 months)
  • Low-quality paintwork
  • Glass surfaces
  • Rubbers (tire, seal etc.)
  • Textiles/fabrics

What is the correct application method?

To apply the product correctly, please read the instruction manual carefully and watch the application video.

Watch the application video

What's the difference between Nasiol MetalCoat F2 and Nasiol ZR53?

Nasiol MetalCoat F2 and ZR53 are both developed for paint protection for cars, yachts, etc. Nasiol MetalCoat F2 is a less durable product than ZR53; its longevity is up to 1 year and it has no scratch resistance effect whilst ZR53 offers up to 3 years of protection. While ZR53 offers 9H hardness, Nasiol MetalCoat F2 offers 7H. The water and oil repellency values between the two products also differ. On the other hand, Nasiol MetalCoat F2 is a more budget-friendly product that is extremely easy to apply for paint protection. It can also be applied as a refresher about 6 – 12 months after a vehicle has been treated with ZR53.

Is it applied to a new vehicle, or a used one? Can it be applied on fresh paint?

Nasiol MetalCoat F2 can be used on new or used vehicle surfaces so long as the necessary pre-application preparations are made. In the instructions of use, it is stated that the product should not be applied to freshly painted surfaces. The reason behind this advice is the fact that the product bonds with well-dried paint much more effectively. For optimum performance, it is advised to apply Nasiol MetalCoat F2 about 3-4 months after the latest paint application.

What should I do once the product cures on the surface? I applied the product incorrectly; what will happen now? What should I do?

If the product is applied incorrectly without taking the instructions into account, it can only be removed from the surface using cutting compounds or sanding.

How many layers should I apply? Will it be more effective if I apply multiple coats?

Once you have applied Nasiol MetalCoat F2 correctly, there is no need to apply extra layers. As the vehicle surface will already be covered by Nasiol MetalCoat F2, there will not be an appropriate surface for a second layer to bond to.

How long is the product’s shelf life? How long after opening the bottle should I finish the product? What are the recommended storage conditions?

An unopened bottle of Nasiol MetalCoat F2 can safely be stored for 12 months under the recommended storage conditions. Once the product has been opened and partly used, the bottle should be kept shut tightly and the remaining product should be used within 1 week. For the ideal storage, the ambient temperature should be between -3°C and +30°C.

Where can I obtain price information?

You can obtain detailed information about the product through our official online store, or by reaching us via email or phone:, +90 212 670 13 95

Can I create my own private label using this product?

You can benefit from our private labeling model for the unbranded Nasiol MF2, creating your own brand by choosing from the many options we offer you in the catalog we have prepared for this purpose.


Nasiol NL272
Nano Layer Ceramic Coating

Nasiol ZR53
Nano Ceramic Coating

Nasiol PPFGuard
Nano Ceramic Coating for
Car PPF Protection


Nasiol XR03
Nano Ceramic Coating

Nasiol NeoCoatX
Nano Ceramic Coating

trim coat

Nasiol TrimCoat
Car Plastic Renovation and Protection

Nasiol GlasShield
Nano Rain Repellent

glasshield wipe on

Nasiol GlasShield Wipe-On
Nano Rain Repellent Wipes


Nasiol CabinCare
Nano Coating for Car Fabric


Nasiol LeatherBoost
Nano Coating for Leather Protection


Nasiol Rapid Shine
Trim and Plastic Restorer